Introduction
Advantage
1. Advanced intelligent operating system
With PLC software support, the adjustment only needs to set the target amount on the touch screen, and the device can automatically increase or decrease to reach the target amount. Color touch display, all functions such as operation, monitoring, operation instructions, etc. are completed in the touch screen.
2. Stable filling and rehydration function
Adopting the principle of functional separation, no rehydration is required during the filling process, and the rehydration process is not installed, thereby overcoming the instability of the refilling at the same time of floating filling.
3. Vial automatic card bottle function
This machine is equipped with a bayonet device to ensure the matching of the bottle mouth and the filling nozzle when filling small capacity (glass bottles, etc.).
4. Wide application range and convenient adjustment
It is suitable for the filling of most bottle types (especially shaped bottles), which overcomes the trouble of changing the dial when the rotary filling machine replaces the bottle type. For the irregular bottle type which can not be filled by the rotary filling machine, the machine has Greater advantage.
5. The filling process is closed and pollution-free
The whole machine is fully enclosed and filled in accordance with national health requirements, achieving hygiene and pollution.
Technical Parameter
Number of heads: | 6 Rinsing heads,6 Filling heads,1 Capping heads |
| Applicable bottle size: | PET bottle |
| Diameter: | ф50-110 mm |
| Bottle height: | 150～340 mm |
| Rated Capacity: | 800BPH |
| Cap Style | Plastic Screw Cap 38mm or 45mm or customized |
| Volume: | 3L-10L |
| Timing Type: | Transducer |
| Washing Drop dryer time: | 3.4sec |
| Filling temperature: | Normal temperature |
| Pressure of washing: | 2.3KG |
| Overall size: | 2000x1400x4500 mm |
| Weight: | About 900KGS |
| Power: | 3.3KW /3 Phases AC 380V 50Hz or by your order |
Applications
Details
Washing Part
6 bottles are running on the conveyer belt with photo electricity, the bottle cylinder will go out, meanwhile push the bottle into bottle support ring, and bottle neck support catch the bottle neck, then main shaft turned 180degree under gear wheel. Let bottle’s mouth face to land, jetting water into bottle, after a few seconds, the main shaft will be back, then finishing the washing.
Filling Part
The machine is composed water/juice tank, float ball, shaft, filling valve, Pneumatic component, electric machine. Washing finished bottle is conveyed into filling position, cylinder push and hold the plate which can hitch bottles, the mouth of bottle can open the valve, finishing filling, plate which can hitching bottle will running down, the valve will close automatically, the time lasting of filling can be adjusted.
Capping Part
The working is intermission when running. There are six positions for capping, and have 1 capping head, can automatically capping. The capper will be screw type with 3 start neck finish.
Client & Us
Dubai, Jordan, Ethiopia, Tanzania,Nigeria, Kenya, Malaysia,Indonesia, Thailand,Mexico…
Advantages
Experienced Overseas Commissioning Team
On-Time Shipment
Certificates
Solutions
PET Bottle Blowing Machine
Automatic bottle blowing machine, which is suitable for blowing various shapes of PET bottles, the capacity is from 3-10L. Preform infrared heating, controllable constant pressure control, in order to achieve the best blowing accuracy. It adopts PLC controller to make the operate more accurate. the whole machine has some spare part drives machine work, including high pressure air compressor, air dryer and air filter, all of them are made from China-Made famous brands with quality guarantee.
Water Treatment System
Raw water pump (pump resource water)—sand filter (remove crude impurities)–active carbon (absorb organic matter, suspended solids)—precision filter (effectively reduce turbidity)–high pressure pump (press water into the filter membrane) — RO system (purify the water)–Ozone sterilizer –water tank
Filling Machine
This CGF 6-6-1 water filling machine is three-in-one machine integrates the functions of rinsing, filling and capping. Drawing on foreign advanced technology, it is designed according to the filling process requirements of mineral water and pure water and is suitable for 5-10L plastic bottles.
The control system has many functions such as production speed control, lack of cap detection, automatic shutdown of blocked bottles, and output counting. All controls are operated with advanced touch screen to realize man-machine dialogue operation.
OPP Labeling Machine
1. The system is controlled by Siemens microcomputer, the touch screen directly clicks the menu operation mode, and the parameter adjustment is convenient and intuitive. The capacity is up-to 20000bph.
2. By replacing the bottle-feeding screw, star wheel and bottle rack, it can be applied to high-speed labeling of bottles of various specifications.
3. The sensitivity of the label electric eye is adjustable, especially for transparent labels and label backing papers with different light transmittances, which can be distinguished and compared.
Packing Machine
1. Frequency converter speed adjust, two segment convey device.
2. Bottle pushing, thermos sealing and cutting whole movement adopt to pneumatic fracture.
3. Proximity switch control film length.
4. Touch screen, PLC system greatly increase facility movement reliability.
5. Double-wind recycle fan machine, ensure shrinkage tunnel inside even temperature.
6. Super big wind-volume cooling system, ensure quickly get into shape.
VIP Cases
| PET and Glass Bottling Line in Turkmenistan | 5 Lines: Tanzania Beverage/ Water Turn-key Project | Ghana Integrated Water and Carbonated Drink Production |
Carbonated Drinks Plant— 4000BPH PET Bottle & 4000BPH Glass Bottle ASHGABAT, TURKMENISTAN | 8000bph small bottle water line & 4000bph carbonated drinks line & 2000bph Gin Wine line & 6L 12L Big Bottle Water Line & 5 Gallon Water Line Dar es salaam , Tanzania | Integrated Water & Beverage plant: 12000 BPH Water & 6000 BPH Carbonated Drink Accra, Ghana |
 |  |  |
Q&A
What are the raw materials used for all machinery?
The main materials used in our beverage equipment are food grade SUS304, SUS316, POM and silicone parts that meet sanitary standards, as well as world-renowned electrical components. We can also make any custom design for you according to your needs.
Do you have any certificate?
Yes,of course. We have various certificates issued by authoritative organizations such as ISO9001, SGS, CE, SONCAP, etc.
What is the payment and delivery terms?
Normally 30% advance payment and 70% balance payment before shipment by TT or L/C based on FOB/CIF/CFR/EXW/DDP/DAP.
Are you a manufacturing or a trading company?
We are a factory, and we offer factory direct prices with excellent quality and worry-free service. Welcome to visit our plant!