Full Automatic High Speed Servo 9000BPH 6 Cavities PET Bottle Blow Molding Machine

9000BPH Fully servo high-speed blow molding machine With Energy-saving With New and High Technology

Reliable Automatic High Speed plastic pet bottle blowing machine is successfully developed and researched by our company by absorbing the most advanced bottle producing technology in the world. It’s mainly made of hopper, elevating system, lining device, ion air blow dust, oven and mainframe, electrical controlling system and pneumatic controlling system.

Introduction

Advantages

 

1、The servo motor is adopted to drive the molding mechanism, triggering off a bottom mold linkage as well. 

2、The servo motor drive stepping and stretching system, greatly improve blowing speed, flexibility and accuracy. 

3、The constant heating system ensures the heating temperature of each preform surface and internal is uniform. 

Heating oven can be overturned, easy for infrared tubes be replaced and maintained. 

4、Positioning installation to the molds, makes it possible for changing molds easily within 30 minutes. 

5、Be equipped the cooling system to the preform neck, ensures the preform neck does not deform during heating and blowing.

6、The man-machine interface with high automation and easy to operate, compact size for occupying a small area. 

7、This series is widely used in making PET bottles, such as drinking, bottling water, carbonated soft drink, medium temperature drink, milk, edible oil, foodstuff, pharmacy, daily chemical, etc.

8、 The whole mechanism works speedy, accurately, stably, flexibly, as well as energy saving and environmental protection. 

Parameters

Type

RM-6

 

Main Machine

Maximum Bottle capacity

750ml(6 cavities); 1500ml(3 cavities)

 

Maxmum Bottle diameter

68mm(6 cavities)

120mm(3 cavities)

 

Neck Diameter

18mm-38mm

 

Maximum bottle height under neck

330mm

 

Maximum preform height under neck

130mm

 

Clamping stroke

140mm

 

Bottle die stroke

50mm

 

Bottle pitch

76.2mm(6 cavities)

152.4mm(3 cavities)

 

Maximum output rate(bph)

9600(0.5L); 3600(1.5L)

 
Heating PartNumber of heating modules4 
Number of heating lamps

48

 

Number of preform bases

108

 
Electric Part

Voltage 

380V

 

Frequency

50/60HZ

 
Service Power 30-50Kw/h 
Installation Power75Kw 
Air SourceLow Presure1Mpa 
Low Pressure air consumption2m³/min 
High Pressure3.5Mpa 
High Pressue air consumption 6m³/min 
Chilled water (water temperature ≤18℃)Pressure2-4bar 
Flux9m³/h 
WeightG.W.Around 8,000KG 
DimensionMain Machine(LxWxH)4500x2400x2300mm 
Preform unscrambler2800x2800x3000mm 

Applications

Auxiliary Equipment

1

Intelligent heating system

Preform are heated by infrared lamps which make the preform stretching more equably and higher transparency. With the help of imported reflective mirror aluminum plate, the heat energy of lamps are took full advantage of; heating time is shorter ; lower power consumption and improving the production capacity. The temperature of each lamp of every layer can be adjusted up and down, forward and backward individuality according to different preforms. Intelligent ventilation system keeps the oven temperature inside constantly.

 

2

cooling water recycle system

Our self-developed heating bases cooling setting ensure the heating bases cooling effect after the bottle-blowing. There are coolant gallery installed inside the oven which use to cut off the heat from the lamps during the preform-heating. The cooling air system under the coolant gallery protests the neck finish from deformation. The chilled water connect to the mold, cool down the mold rapidly and improve the machine production efficiency. 

3

Standardize spare parts and quality electric components

Most of our spare parts meet the international production standard. The standard parts are produced in bulk in our CNC machining center and put into use after strictly inspection by our QC department. These high quality standardize parts ensure the stability and reliably of our machines and reduce the maintenance cost. The motors, PLC, cylinder, solenoid valves, electric parts and blowing valves etc key components of our machines are use quality products of China and international famous brands.

4

Servo preform-divided system

Preform are divided equidistance by servo motor. The stroke and speed of servo motor are easy adjusted through the HMI. All complicated process are done by digitization, safe, fast and accurate. Compare with the traditional server-ways preform-divided, cylinder type preform-divided etc, the servo motor control one-way preform-divided, speed is more faster and position is more accurate.

5

Servo mold-clamping system

The mold-clamping system is drove by servo motor and mechanical connecting rods. The molds and bottom mold are clamped synchronously through servo motor. High-pressure mold-locked by the high-pressure pressurized plates behind the mold framework which can reduce visibility of the bottle clamping line effectively and ensure the bottle quality. Drawer type mold structure design, easy mold exchange, skillful engineer can finish the mold exchange in half an hour.

Client & Us

Dubai, Jordan, Ethiopia, Tanzania,Nigeria, Kenya, Malaysia,Indonesia, Thailand,Mexico…

Advantages

Experienced Overseas Commissioning Team

On-Time Shipment

Certificates

Solutions

1

PET Bottle Blowing Machine

PET Preforms→ heat preform→ stretch→ blowing→ bottles

Making bottles by blowing PET preforms, it is suitable for blowing PET bottles of various shapes, volume from 100 ml to 2000 ml.

2

Water Treatment System

Raw water pump (pump resource water)—sand filter (remove crude impurities)–active carbon (absorb organic matter, suspended solids)—precision filter (effectively reduce turbidity)–high pressure pump (press water into the filter membrane) — RO system (purify the water)–Ozone sterilizer –water tank

3

Mixing system

Syrup melting tank→ Syrup pump→ Syrup filter (to filter impurities)→ Beverage blending tank (mix ingredients with beverage)→ Beverage pump→ Double filter (remove impurities) → CO2 Beverage mixing machine (mix CO2 with beverage)→ Water chiller (bring down temperature for mixing)→ Plate style heat exchange(lower the temperature)→ Control cabinet

4

Filling Machine

Rinsing, filling and capping 3 functions together. Based on advanced technology overseas and designed according to the filling processing demands of juice, energy drink, hot beverages etc. It’s suitable for 200-2000ml plastic bottles.

5

Bottle Warmer

The bottle warmer is designed for eliminate the condensation water caused by low temperature filling on the bottles, making it convenient for later coding, labeling, packing, etc.

6

Labeling Machine

This machine is used for beverage bottle labeling. It uses PVC label to shrink on the Shrink sleeve labeling, Adhesive labeling, OPP labeling are available.

7

Packing Machine

Shrink film wrapping machine, case packing machine, cardboard wrapping machine, half-tray packing machine are available.

VIP Cases

PET and Glass Bottling Line in Turkmenistan5 Lines: Tanzania Beverage/ Water Turn-key ProjectGhana Integrated Water and Carbonated Drink Production

Carbonated Drinks Plant— 4000BPH PET Bottle & 4000BPH Glass Bottle

ASHGABAT, TURKMENISTAN

8000bph small bottle water line & 4000bph carbonated drinks line & 2000bph Gin Wine line & 6L 12L Big Bottle Water Line & 5 Gallon Water Line

Dar es salaam , Tanzania

Integrated Water & Beverage plant: 12000 BPH Water & 6000 BPH Carbonated Drink

Accra, Ghana

Q&A

Yes,of course. We have various certificates issued by authoritative organizations such as ISO9001, SGS, CE, SONCAP, etc.

Normally 30% advance payment and 70% balance payment before shipment by TT or L/C based on FOB/CIF/CFR/EXW/DDP/DAP.

We have a professional technical team to diagnose the cause of failure for you through online video, teach your workers how to replace spare parts, and you can also purchase new spare parts as inventory through our after-sales team.

The production period is 30-60 working days after we confirmed your bottle and cap samples. If your machinery is customized, then may take a little longer.

Contact Now