Full Automatic 2000BPH 2 Cavities PET Bottle Blow Molding Machine

· The automatic bottle blowing machine has advantages of high speed, good quality, high efficiency, better price performance and easy operation. 

· Suitable for all shapes of PET plastic bottles, widely used to produce the carbonated bottle, mineral water, pesticide bottle, oil bottle, cosmetics, wide-mouth bottle and hot fill bottle, beverage bottles, pure water bottles, juice beverage bottles, large diameter bottles or other shapes of bottle.

· Full automatic blow molding machine is suitable for blowing PET bottles of various shapes, volume from 100 ml to 2000 ml, wide application for blowing mineral water bottles, carbonated water bottles and juice bottles. Capacity from 2000 to 8000 b/h.

· RM series blow molding machines are convenient and fast, have large molding capacity and are widely used in many industries.




    1. With advanced PLC control system, the performance is stable and outstanding. 
    2. Compact space design for convenience of mold-conversion, repairing, and maintenance. Also automatic feeding of conveyor belt.
    3. The heat penetration is strong and the preform receives even heat with self-rotating during the preheating process. Minimized transfer pitch for increasing heating efficiency and saving energy.
    4. This series of bottle blowing equipment is highly adaptable. By adjusting the distance between the lamp tube and the reflector, the preform can fully absorb heat. Equipped with an automatic constant temperature device, the temperature can be maintained within a certain range. 
    5. Intact rotating robot grip with linear guider for right access, rapid motion; reducing adjustment and maintenance time.
    6. Electronic inspector for ejecting faulty preform and bottles.
    7. Use different air pressure for blowing and machine operation, energy saving and environmental protection.Fast, safe, and accurate cam-controlled blowing wheel for providing the best bottles. 
    8. Through finite element analysis to optimize modular design for reducing machine wearingand moving inertia. Protection of low temperature cooling system. 
    9. Operating machine through touch panel; program protected by code lock.Protection of low temperature cooling system. 
    10. Thismachine is easy to install and start. Low scrap rate.





Depend  on bottle design


Product   type

Body  diameter




Neck   diameter





Mold  thick




Main   machine power

Electrical  source power

380v   3Phase /220v 3Phase  50/60HZ

Rated Power


Really  use power


Air  compressor

1.6m3/min   3.0MPa

Air  dryer

2.0m3/min   3.0MPa

Cooling   water

Cooling  water







Auxiliary   equipment

(preform   unscramble)





Resin   available




Auxiliary Equipment


Automatic Mold Uploader

1- Fully automatic bottle transfer, transferring the preform to the next section

2- Precise and efficient, saves time and labour costs



SUS304 Clips

1- Automatic running clips for clamping bottle preform to the conveyor of the heating head

2- Time saving and efficient, fully automatic

3- Hands free, no need for human supervision


Heating Part

1 – Adopt special electronic controlling circuit for heating, high efficiency in simultaneous controlling.
2 – one lamp or more, lower power consumption.
3 – The preform will be heated evenly, not be influenced by outside environment.
4- Cooling system with cold air cycle ensures same heat exposure of internal and external surface.


Blowing Part

1- The mold is automatically transferred to the heating device, rotating the bottle preform, heating evenly
2- Wide adaptability, suitable for every type mould thickness.
3- Special design, high rigid compound die structure.
4- High responsiveness pneumatic components, action timely and precisely.


Auxiliary Equipment

Flow chart of blowing machine is :
High Pressure Air Compressor — Air Tank — Air Filter — Air Dryer — Low Pressure Air Compressor — Air Filter — Full Automatic
Blow Moulding Machine — Mould — Water Chiller
All these equipment are available to take.

Client & Us

Dubai, Jordan, Ethiopia, Tanzania,Nigeria, Kenya, Malaysia,Indonesia, Thailand,Mexico…


Experienced Overseas Commissioning Team

On-Time Shipment




PET Bottle Blowing Machine

PET Preforms→ heat preform→ stretch→ blowing→ bottles

Making bottles by blowing PET preforms, it is suitable for blowing PET bottles of various shapes, volume from 100 ml to 2000 ml.


Water Treatment System

Raw water pump (pump resource water)—sand filter (remove crude impurities)–active carbon (absorb organic matter, suspended solids)—precision filter (effectively reduce turbidity)–high pressure pump (press water into the filter membrane) — RO system (purify the water)–Ozone sterilizer –water tank


Mixing system

Syrup melting tank→ Syrup pump→ Syrup filter (to filter impurities)→ Beverage blending tank (mix ingredients with beverage)→ Beverage pump→ Double filter (remove impurities) → CO2 Beverage mixing machine (mix CO2 with beverage)→ Water chiller (bring down temperature for mixing)→ Plate style heat exchange(lower the temperature)→ Control cabinet


Filling Machine

Rinsing, filling and capping 3 functions together. Based on advanced technology overseas and designed according to the filling processing demands of juice, energy drink, hot beverages etc. It’s suitable for 200-2000ml plastic bottles.


Bottle Warmer

The bottle warmer is designed for eliminate the condensation water caused by low temperature filling on the bottles, making it convenient for later coding, labeling, packing, etc.


Labeling Machine

This machine is used for beverage bottle labeling. It uses PVC label to shrink on the Shrink sleeve labeling, Adhesive labeling, OPP labeling are available.


Packing Machine

Shrink film wrapping machine, case packing machine, cardboard wrapping machine, half-tray packing machine are available.

VIP Cases

PET and Glass Bottling Line in Turkmenistan5 Lines: Tanzania Beverage/ Water Turn-key ProjectGhana Integrated Water and Carbonated Drink Production

Carbonated Drinks Plant— 4000BPH PET Bottle & 4000BPH Glass Bottle


8000bph small bottle water line & 4000bph carbonated drinks line & 2000bph Gin Wine line & 6L 12L Big Bottle Water Line & 5 Gallon Water Line

Dar es salaam , Tanzania

Integrated Water & Beverage plant: 12000 BPH Water & 6000 BPH Carbonated Drink

Accra, Ghana


Yes,of course. We have various certificates issued by authoritative organizations such as ISO9001, SGS, CE, SONCAP, etc.

Normally 30% advance payment and 70% balance payment before shipment by TT or L/C based on FOB/CIF/CFR/EXW/DDP/DAP.

We have a professional technical team to diagnose the cause of failure for you through online video, teach your workers how to replace spare parts, and you can also purchase new spare parts as inventory through our after-sales team.

The production period is 30-60 working days after we confirmed your bottle and cap samples. If your machinery is customized, then may take a little longer.

Contact Now

Contact Now