Carbonated Beverage Mixing System

· This mixer adopts advances gas-liquid mixing device,can mix syrup,water and CO2 gas at the same time for filling machine.

· It can apply to thin beer, aerate for beer and produce sparking wine.

· This machine is advances in technology, even in mixing, reliable in performance, compact in structure, easy in operation.

· It adopts foreign advanced technology-static mixer to lighten water layer, increase carbonizing time, assure mixing result and deoxidation.

· It is suitable for mixing all kinds of drink, such as soda water, fruit juice, cola and other soft and hard drink. It is suitable for aerated beverage firm of large, middle or small scale.



  • It is applied for carbonation and proportion mixing of various gas beverages (water, syrup, and CO2), such as lemon and Cola.It is the main equipment among the complete equipment of beverage production line(especially the key equipment producing middle-and top-level beverage).
  • After the adoption of advanced technologies in the chemical industry—static mixer (carbonizer), features large area of gas/liquid mass transfer,small resistance loss, high efficiency, low energy consumption, and simple structure. It also adopts the multi-stage centrifugal pump with reliable performance andlow noise, guaranteeing the performance of the whole machine.
  • The mixing proportion is accurate and easy for adjustment. With no need of parts replacement, Syrup water CO2drink mixer can realize the quick output adjustment and the proportion of syrup and water.
  • By use of CO2reflux deoxidation, not onlysaves CO2, but also achieves the objective of deoxidation and makes the deoxidation water have better pre-carbonation effects.
  • Convenient to adjust the gas content. According to the requirements of beverage gas content, the adjustment can be done through proper operation.
  • Has perfectautomatic control system,featured by coordinate action, simple structure, continuous production, and high automation.


Carbonated Drink Mixing Machine is applied for carbonation and proportion mixing of various gas beverages (water, syrup, and CO2), such as lemon and Cola. It is the main equipment among the complete equipment of beverage production line (especially the key equipment producing middle-and top-level beverage).

The machine is made with the newest technology introduced from Japan. It is in the leading position comparing with similar products in china.The mixer is mainly suitable for mixing process of all kinds of carbonate drink. It is also used in mixing of slurry drink, fermented drink and other drinks.



Automation with Alarm

The pressure in all tank and the liquid level of the machine are all controlled automatically with PLC. Once an error occurs, the alarm lamp will light and the alarm ring will sound and the mixer will stop automatically.


Easy operation and regulation

The operation of the mixer is especially convenient. Only turn around the buttons according to the pre-set program, the normal operation can be carried out. The production capacity, water-sugar proportion and gas content can be adjusted without exchanging any parts.


Even mixing and accurate proportion

One time mixing process is adopted,so the mixture is even. The mixing proportion of water and sugar is strictly controlled with measuring needle valve with fine regulation. Its precision can reach about 5%.


Enough gas content

The mixer adopts vacuum desoxidation technology at normal-temperature. Its desoxidation ratio reaches above 90%. It has a baffle heat exchanger to cool the sugar-water mixture and carry out twice carbonating. So its carbon content is especially high.

Client & Us

Dubai, Jordan, Ethiopia, Tanzania,Nigeria, Kenya, Malaysia,Indonesia, Thailand,Mexico…


Experienced Overseas Commissioning Team

On-Time Shipment




PET Bottle Blowing Machine

PET Preforms→ heat preform→ stretch→ blowing→ bottles

Making bottles by blowing PET preforms, it is suitable for blowing PET bottles of various shapes, volume from 100 ml to 2000 ml.


Water Treatment System

Raw water pump (pump resource water)—sand filter (remove crude impurities)–active carbon (absorb organic matter, suspended solids)—precision filter (effectively reduce turbidity)–high pressure pump (press water into the filter membrane) — RO system (purify the water)–Ozone sterilizer –water tank


Mixing system

Syrup melting tank→ Syrup pump→ Syrup filter (to filter impurities)→ Beverage blending tank (mix ingredients with beverage)→ Beverage pump→ Double filter (remove impurities) → CO2 Beverage mixing machine (mix CO2 with beverage)→ Water chiller (bring down temperature for mixing)→ Plate style heat exchange(lower the temperature)→ Control cabinet


Filling Machine

Rinsing, filling and capping 3 functions together. Based on advanced technology overseas and designed according to the filling processing demands of juice, energy drink, hot beverages etc. It’s suitable for 200-2000ml plastic bottles.


Bottle Warmer

The bottle warmer is designed for eliminate the condensation water caused by low temperature filling on the bottles, making it convenient for later coding, labeling, packing, etc.


Labeling Machine

This machine is used for beverage bottle labeling. It uses PVC label to shrink on the Shrink sleeve labeling, Adhesive labeling, OPP labeling are available.


Packing Machine

Shrink film wrapping machine, case packing machine, cardboard wrapping machine, half-tray packing machine are available.

VIP Cases

PET and Glass Bottling Line in Turkmenistan5 Lines: Tanzania Beverage/ Water Turn-key ProjectGhana Integrated Water and Carbonated Drink Production

Carbonated Drinks Plant— 4000BPH PET Bottle & 4000BPH Glass Bottle


8000bph small bottle water line & 4000bph carbonated drinks line & 2000bph Gin Wine line & 6L 12L Big Bottle Water Line & 5 Gallon Water Line

Dar es salaam , Tanzania

Integrated Water & Beverage plant: 12000 BPH Water & 6000 BPH Carbonated Drink

Accra, Ghana


Turnkey projects are available. We can help you start a new company in the manufacturing of bottled water or beverages. You can also check our successful cases for reference. Please feel free to contact our sales team.

We will help you to calculate all the cost including machinery, raw materials and related expense.

Our technical team can design the machines according to your actual requirements (raw material, bottle shapes, filling capacity, installation power and so on), we have rich experience to offer you professional suggestions.

Contact Now