Automatic Glass Bottle Beverage Filling Machine

1, This machine is using high-strength stainless steel bottles of spring-loaded folders, to ensure a stable reversal of the glass bottles. The nozzle is a plum-like structure can wash every corner of the sidewall and bottom to make the bottle clean.
2, This machine with spring-type mechanical lifting equipment to upgrade glass bottles, large bearing support floundering in the vat and use of guide-rod in the orientation of the structure, there are pre-cover features.

Introduction

Advantage

1, This machine is using high-strength stainless steel bottles of spring-loaded folders, to ensure a stable reversal of the glass bottles. The nozzle is a plum-like structure can wash every corner of the sidewall and bottom to make the bottle clean.
2, This machine with spring-type mechanical lifting equipment to upgrade glass bottles, large bearing support floundering in the vat and use of guide-rod in the orientation of the structure, there are pre-cover features.
3, Using high-precision mechanical filling valve, with cylinder liquid level and the back pressure controlled by a variable signal proportional. Fast, stable, accurate, to be vacuum one at a time.
4, Stainless steel plunger and mechanical stirring gland-type magnetic reasonable cap to ensure that the gland is healthy and reliable. Hopper and the cap taking- cover, capping transmitted by magnetic. The capping is reliable and automatic unloading, reducing the rate of broken bottles.
5, This machine adopts advanced man-machine interface, PLC control, frequency conversion stepless speed regulation and other automatic control technology, with no bottle no open valves, no stamps, no cap no operation, and other security protection.

Parameter

Model

CGFR-C

12-12-1

CGFR-C

12-12-6

CGFR-C

18-18-6

CGFR-C

24-24-8

CGFR-C

32-32-8

Washing No

12

12

18

24

32

Filling No

12

12

18

24

32

Capping No

1

6

6

8

8

Capacity(bph)

2000

3000-3500

5000-6000

8000-9000

12000-13000

Power(kw)

1.5

2.0

3.5

4.0

4.8

Overall dimension(mm)

1400x1400x2000

2100x1400x2500

2460x1720x2650

3100x2100x2650

3500x2500x2650

Weight(kg)

1350

2500

3500

4500

5500

Applications

Details

1

Washing Part

1.The glass bottle washing filling capping machine is a rotary bottle washing machine, it adopts water spray to clean the bottle.
2.Using company original tilting bottle clip, bottle clamp stuck bottleneck, avoid the traditional bottle on rubber clip to block the bottle thread parts may be caused by the pollution.

2

Filling Part

1.It adopts cylinder feeding structure, filling valve with high filling speed and mass flow rate valve which control liquids level accurately and without loss.
2.Filling machine uses gravity filling.
3.Machine PLC automatic control, fault online display, such as blocking the bottle, missing and so on.

3

Capping Part

1.The capping system applies advanced technology, when clamp the cap will screw immediately and magnetic torque type capping head and avoid loss.
2.No bottles no filling and capping.
3.It is very convenient to clean and maintenance.

Client & Us

Dubai, Jordan, Ethiopia, Tanzania,Nigeria, Kenya, Malaysia,Indonesia, Thailand,Mexico…

Advantages

Experienced Overseas Commissioning Team

On-Time Shipment

Certificates

Solutions

1

Water Treatment System

Raw water pump (pump resource water)—sand filter (remove crude impurities)–active carbon (absorb organic matter, suspended solids)—precision filter (effectively reduce turbidity)–high pressure pump (press water into the filter membrane) — RO system (purify the water)–Ozone sterilizer –water tank

2

Glass Bottle Filling Machine

1.The filling machine adopts the structure of feeding glass bottles by feeding screw, automatically flushes the bottles, and adopts the principle of lifting and lowering of the filling valve, so that the whole line conveys the bottles smoothly.
2.The constant pressure filling principle is used for fixed liquid level filling, and the secondary valve opening technology is used to meet the full liquid level filling process requirements.
3.The rotary cap adjuster adopts pneumatic cap management, which has the functions of not damaging the surface of the cap, sending a signal for the lack of cap in the hopper, and controlling the capping machine to automatically replenish the cap.

3

Automatic Sticker Labeling Machine

After the bottle-separating mechanism separates the products, the sensor detects the passing of the product and sends a signal back to the labeling control system. The control system controls the motor to send out the label and attach it to the position where the product is to be labelled. The product flows through the labeling device and the labeling tape Drive the product to rotate, the label is rolled over, and the sticking action of a label is completed.

4

Full Automatic Half-Tray Wrap Packing Machine

The bottles are separated into multiple lanes on the conveyor belt, the bottles are grouped and dropped onto the cardboard by the bottle drop break. During bottle drop break and cardboard drop, pass through a set of template blocks and then fold the cardboard into a carton form. The main drive drives the carton forward, and at the same time, the top of the carton is sprayed with glue through the glue spraying break, and the cam breaks again and folds through the top frame, and the top carton is folded on the same top carton to complete the top sticking.

5

Glass Bottle De-palletizer

The depalletizer is mainly used in the unloading of glass bottles and cans. The empty cans stacked on the pallet are pushed to the mesh conveyor layer by layer from top to bottom. The unloading of glass bottle is automatically controlled by PLC programmable computer. The depalletizer adopts frequency conversion motor, frequency conversion speed regulation, computer control, and the conveying are stable, smooth and reliable; automatic control technology, mechatronics technology, network technology, computer-controlled automatic operation. The reciprocating cycle automatic stacking meets the set requirements.

6

Mixing System

The juice mixing system formulates the production process according to the characteristics of different kinds of juice. According to the formula of the juice beverage, the juice preparation process is designed.
It’s a complete system used to produce juice beverages. It contains sugar melting tank, juice mixing tank, heating and cooling tank, sterilizer and so on. Depend on your different formulations, we can customize machines for you. Mainly used for pretreating of juice, tea or flavored beverages,etc.Best welding, polishing working with high quality stainless steel 304/316. Scientific process design. Automatic control.
Juice preparation process: Syrup melting machine > Syrup pump > Syrup filter > Mixing tank > Beverage pump > Double filter > Mixing tank > Double filter > UHT sterilizer > Homogenizer > CIP system

VIP Cases

PET and Glass Bottling Line in Turkmenistan5 Lines: Tanzania Beverage/ Water Turn-key ProjectGhana Integrated Water and Carbonated Drink Production

Carbonated Drinks Plant— 4000BPH PET Bottle & 4000BPH Glass Bottle

ASHGABAT, TURKMENISTAN

8000bph small bottle water line & 4000bph carbonated drinks line & 2000bph Gin Wine line & 6L 12L Big Bottle Water Line & 5 Gallon Water Line

Dar es salaam , Tanzania

Integrated Water & Beverage plant: 12000 BPH Water & 6000 BPH Carbonated Drink

Accra, Ghana

Q&A

   We are a factory, and we offer factory direct prices with excellent quality and worry-free service. Welcome to visit our plant!

   We provide video online factory viewing service. In addition, we have a demonstration factory in Dubai. You are also welcome to visit Dubai to see the machinery.

   Turnkey projects are available. We can help you start a new company in the manufacturing of bottled water or beverages. You can also check our successful cases for reference. Please feel free to contact our sales team.

Contact Now

Contact Now